FIRE PUMP

PREVENTIVE MAINTENANCE PROGRAM CHECK LIST

• Transfer Case - Drain oil and check for metal and contamination.

• Outboard Bearing - Grease outboard bearing.

• Pump Mounts - Inspect pump mounting for rust, corrosion, damage, or loose bolts.

• Pump Shift - Check operation of air/electric shift, insure proper transmission lock-up, check "OK to Pump" indicators, and operate and check manual override if equipped.

• Pump Shift Linkage - Lubricate shift linage. Test/inspect manual override if equipped.

• Driveline - Inspect flange bolts, drive shafts and U-joints.

• Primer - Check oil level and clean vent hole as necessary.

• Caps - Remove, clean, inspect and lubricate all discharge and suction caps.

• Suction Screen - Inspect and clean all screens.

• Drain Valves - Inspect and lubricate all drain valves.

• Discharge Valves - Inspect and lubricate all valves, linkages, and handles.

• Booster Reels - Lubricate all gears, chains, and swivels.

• Strainers - Check and clean strainers on governor and relief valves as necessary.

• Pump Panel Lighting & Indicators - Check operation of all pump panel lights including all tank level indicators, pump indicators, and engine indicators.

• Pump Packing - Run Pump @ 150psi for 5 minutes while checking packing for leaks.

• Gauges - Inspect gauges for damage and leaks.

• Transfer Valve - Inspect, lubricate and check operation of transfer valve if equipped.

• Pressure Governor - Insure proper operation of governor.

• Relief Valve - Insure proper operation of relief valve.

• Pump Body and Plumbing - Check pump, plumbing, manifolds, and transfer case of leaks or damage

ALL PROBLEMS FOUND WILL BE SUBMITTED IN WRITING.

 

RETURN TO PREVENTIVE MAINTENANCE PROGRAMS